No es necesario hacerlo si un trabajo por lotes puede leer desde un sistema de archivos para recuperar un cambio. Simplemente ejecute un trabajo con ruta a un directorio único temporal y pase la misma ruta al script de shell hijo. El script bloqueará un archivo en ese directorio y escribirá un archivo con nuevos valores cerca del archivo de bloqueo. Un script de trabajo de vez en cuando bloqueará el mismo archivo, analizará y leerá los cambios del archivo de valores. Para descubrir cómo hacer un bloqueo en el shell de Unix solo busque unix shell lock fileo bash lock file, ya existen muchas soluciones para eso.
Beneficios de esta solución:
- portátil entre casi cualquier sistema operativo como Windows o Unix
- no es necesario escribir y duplicar analizadores complejos para cada intérprete (unix / windows / etc.) para volver a leer los valores del archivo siempre que el archivo de valores permanezca simple
Problemas en la implementación a continuación:
- La implementación se basa en un bloqueo de archivo en una fase de redirección de shell (
flocken Linux para lograr el efecto de exclusión, en Windows tiene una exclusión incorporada)
- Cada valor para una variable es un valor de línea única (no una línea múltiple)
La implementación se almacena aquí: https://sourceforge.net/p/contools/contools/HEAD/tree/trunk/Scripts/Tools
La bashimplementación:
set_vars_from_locked_file_pair.sh
#!/bin/bash
# Another variant of a configuration file variables read and set script.
# The script must stay as simple as possible, so for this task it uses these parameters:
# 1. path where to lock a lock file
# 2. path where to read a file with variable names (each per line)
# 3. path where to read a file with variable values (each per line, must be the same quantity of lines with the variable names file)
# Script can be ONLY included by "source" command.
if [[ -n "$BASH" && (-z "$BASH_LINENO" || ${BASH_LINENO[0]} -gt 0) ]]; then
function set_vars_from_locked_file_pair()
{
# the lock file directory must already exist
if [[ ! -d "${1%[/\\]*}" ]]; then
echo "$0: error: lock file directory does not exist: \`${1%[/\\]*}\`" >&2
return 1
fi
if [[ ! -f "${2//\\//}" ]]; then
echo "$0: error: variable names file does not exist: \`$2\`" >&2
return 2
fi
if [[ ! -f "${3//\\//}" ]]; then
echo "$0: error: variable values file does not exist: \`$3\`" >&2
return 3
fi
function LocalMain()
{
# open file for direct reading by the `read` in the same shell process
exec 7< "$2"
exec 8< "$3"
# cleanup on return
trap "rm -f \"$1\" 2> /dev/null; exec 8>&-; exec 7>&-; trap - RETURN" RETURN
local __VarName
local __VarValue
# shared acquire of the lock file
while :; do
# lock via redirection to file
{
flock -s 9
# simultaneous iteration over 2 lists in the same time
while read -r -u 7 __VarName; do
read -r -u 8 __VarValue
# drop line returns
__VarName="${__VarName//[$'\r\n']}"
__VarValue="${__VarValue//[$'\r\n']}"
# instead of `declare -gx` because `-g` is introduced only in `bash-4.2-alpha`
export $__VarName="$__VarValue"
(( ${4:-0} )) && echo "$__VarName=\`$__VarValue\`"
done
break
# return with previous code
} 9> "$1" 2> /dev/null # has exclusive lock been acquired?
# busy wait
sleep 0.02
done
}
LocalMain "${1//\\//}" "${2//\\//}" "${3//\\//}" "${4:-0}"
}
fi
testlock.sh
#!/bin/bash
{
flock -x 9 2> /dev/null
read -n1 -r -p "Press any key to continue..."
echo >&2
} 9> "lock"
Lo mismo en Windows (como ejemplo de portabilidad):
set_vars_from_locked_file_pair.bat
@echo off
rem Another variant of a configuration file variables read and set script.
rem The script must stay as simple as possible, so for this task it uses these parameters:
rem 1. path where to lock a lock file
rem 2. path where to read a file with variable names (each per line)
rem 3. path where to read a file with variable values (each per line, must be the same quantity of lines with the variable names file)
rem disable alternative variables expansion to avoid `!` character consumption
setlocal DISABLEDELAYEDEXPANSION
set "FILE_LOCK_PATH=%~1"
set "FILE_VAR_NAMES_PATH=%~2"
set "FILE_VAR_VALUES_PATH=%~3"
set "PRINT_VARS_SET=%~4"
set "FILE_LOCK_DIR=%~d1"
rem the lock file directory must already exist
if not exist "%FILE_LOCK_DIR%" (
echo.%~nx0: error: FILE_LOCK_DIR does not exist: "%FILE_LOCK_DIR%"
exit /b 1
) >&2
if not exist "%FILE_VAR_NAMES_PATH%" (
echo.%~nx0: error: FILE_VAR_NAMES_PATH does not exist: "%FILE_VAR_NAMES_PATH%"
exit /b 2
) >&2
if not exist "%FILE_VAR_VALUES_PATH%" (
echo.%~nx0: error: FILE_VAR_VALUES_PATH does not exist: "%FILE_VAR_VALUES_PATH%"
exit /b 3
) >&2
rem The endlocal works only in the same call context
endlocal
rem exclusive acquire of the lock file
:REPEAT_LOCK_LOOP
(
(
rem if lock is acquired, then we are in...
call :MAIN "%%~2" "%%~3" "%%~4"
call set "LASTERROR=%%ERRORLEVEL%%"
rem exit with return code from the MAIN
) 9> "%~1" && (del /F /Q /A:-D "%~1" & goto EXIT)
) 2>nul
rem Busy wait: with external call significantly reduces CPU consumption while in a waiting state
pathping localhost -n -q 1 -p 20 >nul 2>&1
goto REPEAT_LOCK_LOOP
:EXIT
exit /b %LASTERROR%
:MAIN
rem drop last error
type nul>nul
if %~30 NEQ 0 goto SET_WITH_PRINT
rem trick with simultaneous iteration over 2 lists in the same time
(
for /f "usebackq eol=# tokens=* delims=" %%i in ("%~1") do (
set /p "%%i="
)
) < "%~2"
exit /b 0
:SET_WITH_PRINT
rem trick with simultaneous iteration over 2 lists in the same time
(
for /f "usebackq eol=# tokens=* delims=" %%i in ("%~1") do (
set /p "%%i="
rem to filter out wrong matches of a variable from the `set "%%i"`
for /f "usebackq eol=# tokens=1,* delims==" %%j in (`set "%%i"`) do if /i "%%j" == "%%i" echo.%%i=%%k
)
) < "%~2"
exit /b 0
testlock.bat
@echo off
(
pause
) 9> ./lock
Para escribir los archivos de la misma manera, bloquee su código.
xprapodría ser interesante.